Frame anchor MB-ST, zinc-plated
For detailed information, other images and documents, please select individual articles from the following table.
Frame anchor MB-ST, zinc-plated
with long expansion zone for perforated brick and solid materials
Available in 4 versions
Prices for customers after login
Exclusively for trade customers
Register now and access more than 40'000 products
Variants
Exclusively for trade customers
Register now and access more than 40'000 products
with long expansion zone for perforated brick and solid materials
Application area:
For securing
frames, slatted and spaced installations, façade and roof substructures made from wood, metal and plastic, as well as square timbers, wooden slats, battens, metal profiles, insulation, window and door frames, metal sheets and panelling etc.
to
base materials in usage categories
a: Reinforced or non-reinforced normal weight concrete with a strength class of > C12/15 in line with EN 206-1:2014
b: Solid brick masonry
c: Perforated brick masonry
c: Autoclaved aerated concrete
In the case of other bricks in usage categories b and c, the characteristic load-bearing capacity of the anchors can be determined by job site tests according to ETAG 020, Attachment B, Version of March 2012.
Advantages:
- For use in in-place installation
- Resistant to rotting, weathering and ageing
- The drive-in support prevents premature expansion of the anchor
- Wall plug body and screw are perfectly matched, guaranteeing secure holding power
Advice:
- Perforated brick:
- Nominal bore diameter = 10 mm, drill hole depth = 80 mm
- Effective anchorage depth = 70 mm
- Autoclaved aerated concrete:
- Nominal bore diameter = 9 mm, drill hole depth = 100 mm
- Effective anchorage depth = 90 mm
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!