Welcome to RECA Switzerland For trade customers only
Recaseal uni window sealing film, alternating VSK and SK strips
Recaseal uni window sealing film, alternating VSK and SK strips - 1
Recaseal uni window sealing film, alternating VSK and SK strips - 2

For detailed information, other images and documents, please select individual articles from the following table.

Recaseal uni window sealing film, alternating VSK and SK strips

See product details

Available in 4 versions

Prices for customers after login

Exclusively for trade customers

Register now and access more than 40'000 products

Variants

Exclusively for trade customers

Register now and access more than 40'000 products

Call customer service: +41 44 745 75 75

Prices for customers after login


The self-adhesive Recaseal uni VSK is used for the sealing of window and door connection joints without any additional adhesive needed. Thanks to the moisture-variable membrane, the tape ensures optimal joint drying all year round. The self-adhesive surface on both sides allows the tape to be attached to the window or door frame as you like. The self-adhesive with split liner not only saves on additional adhesive, but also working time.
The increased UV resistance of 9 months offers a high degree of reliability even during longer construction phases.

Application area:


The variable sd value of the Recaseal uni ensures optimum joint drying. It is suitable for internal and external sealing. The fleece lamination not only allows the full surface of the tape to be plastered over, but it also adheres to many surfaces that are commonly used in construction, such as masonry, concrete, PVC, metal etc.

Advantages:


● Self-adhesive, no additional adhesive required
● UV-resistant for up to 9 months
● Increased water tightness against driving rain
● Variable SD value for intelligent moisture management
● No risk of mixing up the inside and outside
● Only one product to store
● Saves time and materials

Advice:


In order to avoid any problems with adhesion, the full surface of the self-adhesive strips must be applied to the blind frame. The film must be applied without tension. In order to avoid longitudinal tension, the film should be cut every 12 metres and overlapped again. The overlapping edges of film should have a minimum width of 20 mm. In the case of vertical joins, the upper foil must always be stuck to the top of the lower foil.
The product should be stored in the original packaging in a dry, dust-free environment for up to 12 months from the date of manufacture.
In providing this information, we want to ensure you receive the best advice based on the tests we perform. However, due to the large number of applications and the storage and handling conditions that lie outside the scope of our influence, we assume no liability for the application results in individual cases. We therefore always recommend that you conduct your own tests.