Nail anchor N/A4 with M6 thread
N 6-5/49 nail anchor with M6 thread A4 stainless steel, WAF 10 M6x49
Register now and access more than 40'000 products
Application area:
Multiple attachment of non-load-bearing systems with approval
- For use in cracked concrete (tension zone) and non-cracked concrete (compression zone)
- E.g. lightweight ceiling cladding and suspended ceilings, pipes, cable trays, metal profiles, perforated strips, wire hangers, vernier hangers, wooden strips, wooden laths, square timbers etc.
- For use in reinforced or non-reinforced normal weight concrete with a concrete compressive strength of min. C12/15 and max. C50/60 in accordance with EN 206-1:2000-12
Can be used outdoors (including in industrial atmospheres and coastal areas) or in wet rooms.
Field of Application:
Suspended ceilings, pipes, cladding, cable trays
Advantages:
The nail anchor offers the benefits of a stud anchor while also being easy to install; the nail anchor is simply knocked into the drill hole through the attachment. No subsequent torque is required, not even for the threaded version.
Quick and easy installation
- Less drilling required thanks to reduced effective anchorage depth of 25 mm
- Easy insertion: Simply hammer in - no torque required
- No special drills or setting tools required
In-place installation
Minimal spacing and edge distance
Elegant, attractive design
Load-controlled expansion anchor. Expands when subjected to load
Advice:
- Anchors in a redundant non-structural system in concrete: European Technical Assessment ETA-11/0240
- Fire resistance: R30, R60, R90, R120 (base material: concrete C20/25 to C50/60): Technical Report TR 020 "Evaluation of anchorages in concrete concerning resistance to fire" (included in ETA-11/0240)
Datasheets(X)
 | |
Anchor diameter x anchor length (l) | 6 x 49 mm |
Nominal drill-bit diameter (d 0) | 6 mm |
Max. attachment height (t fix) | 5 mm |
Drill hole depth (h 0) | 40 mm |
Effective anchoring depth (h ef) | 30 mm |
Max. attachment height reduced (t fix, red) | 15 mm |
Drill hole depth reduced (h 0, red) | 35 mm |
Effective anchoring depth reduced (h ef, red) | 25 mm |
Through-hole in the component to be connected (d f) | 7 mm |
Minimum component thickness (h min) | 80 mm |
Surface | Plain |
Torque during anchoring (T inst) | 4 Nm |
Material | Stainless steel A4, 1.4401 |
Anchor diameter | 6 mm |
Anchor length (l) | 49 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!