S 80 Fix it

High-quality adhesive with extremely high initial adhesion

Application area:

RECA S 80 Fix it has been specially developed as an adhesive with extremely high initial adhesion for bonding a variety of building materials that have a high risk of discolouration due to their porous structure, such as natural stone.

Field of Application:

S 80 generally also glues heavy materials straight from the cartridge without any special measures.
Apply the adhesive with the supplied V-nozzle in vertical strands at intervals of 10-20 cm. Position and press the materials in place to ensure that the adhesive layer between the material and the substrate is at least 2-3 mm thick. Do not apply the adhesive as dots! Due to the particularly high initial adhesion, the bonded elements usually do not have to be supported or fixed during the curing process.

Advantages:

• Extremely high initial adhesion
• Non-discolouring
• Elements usually do not have to be fixed or supported during the curing process
• High final strength, high E-module and high mechanical strength
• Free of isocyanates, phthalates, solvents and silicone
• Shrink- and bubble-free
• Non-corrosive in combination with metals
• Neutral curing, virtually odourless
• Good weather and moisture resistance
• Perfect adhesion without primer on most surfaces, even if slightly damp

Advice:

This information is only a recommendation based on our experience. Users must always conduct tests before using the products. Safety data sheet available at http://www.recanorm.de/de/dienstleistungen/datenblaetter/sicherheitsdatenblaetter-chemie.html

• Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene
• Not suitable for continuous water exposure
• Not suitable for movement joints
• Not suitable in combination with chlorides (pools)